Removal

METER: COMBINATION METER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.





2. REMOVE METER HOOD SUB-ASSEMBLY
(a) Tilt the steering column assembly down as far as possible.
(b) Using a moulding remover, detach the 9 claws.
HINT: Tape the moulding remover tip before use.

(c) Remove the meter hood.






3. REMOVE COMBINATION METER ASSEMBLY
(a) Remove the screw and detach the 2 claws.
(b) Remove the combination meter and disconnect the connectors.






4. REMOVE COMBINATION METER GLASS
(a) Detach the 8 claws, and then remove the combination meter glass.