Meter / Gauge System

METER: METER / GAUGE SYSTEM: PRECAUTION

PRECAUTION
NOTE: When disconnecting the battery negative (-) terminal, initialize the following systems after the terminal is reconnected.





1. REMOVAL AND INSTALLATION OF BATTERY TERMINAL
(a) Before performing electronic work, disconnect the battery negative (-) terminal cable in order to prevent it from shorting and burning out.
(b) When disconnecting and reconnecting the battery cable, turn the ignition switch and lighting switch off and loosen the terminal nut completely. Perform operations without twisting or prying on the terminal.
(c) When the battery terminal cable is removed, the memory of the clock, radio, DTCs, etc. are erased. So before removing it, check and make a note of them.