Reassembly

LIGHTING: HEADLIGHT ASSEMBLY (w/ Projector Headlight): REASSEMBLY

REASSEMBLY
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL HEADLIGHT COVER SEAL






(a) Install a new headlight cover seal.

HINT:
- Clean the installation surface before installing the headlight cover seal.
- Install the headlight cover seal along the in scribed line on the headlight unit.

2. INSTALL HEADLIGHT CORD






(a) Engage the claw and clamp, and install the headlight cord.
3. INSTALL CLEARANCE LIGHT BULB
(a) Install the clearance light bulb to the headlight cord.






(b) Turn the clearance light bulb and headlight cord in the direction indicated by the arrow and install them as a unit.
4. INSTALL FRONT SIDE MARKER LIGHT BULB
(a) Install the front side marker light bulb to the headlight cord.






(b) Turn the front side marker light bulb and headlight cord in the direction indicated by the arrow and install them as a unit.
5. INSTALL FRONT TURN SIGNAL LIGHT BULB
(a) Install the front turn signal light bulb to the front turn signal light socket.






(b) Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.
6. INSTALL NO. 1 HEADLIGHT BULB






(a) Install the No. 1 headlight bulb as shown in the illustration.
7. INSTALL NO. 2 HEADLIGHT BULB






(a) Install the No. 2 headlight bulb as shown in the illustration.