Installation

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY
(a) Attach the 2 claws and install the license plate light assembly.
(b) Connect the connector.
2. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
3. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

4. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

5. INSTALL BACK DOOR GARNISH CENTER Reassembly

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a) Perform initialization Testing and Inspection.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.