Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY





(a) Install the front passenger airbag assembly with the 2 screws.
(b) Connect the connectors to the airbag.
(c) Install the clip.
(d) Install the instrument panel sub-assembly upper Installation.






(e) Connect the connector to the airbag.
NOTE: When handling the airbag connector, do not damage the airbag wire harness.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
(a) Perform initialization Testing and Inspection.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

5. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.