Removal

2AZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE WINDSHIELD WIPER ARM COVER

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

4. REMOVE HOOD TO COWL TOP SEAL

5. REMOVE COWL TOP VENTILATOR LOUVER RH

6. REMOVE COWL TOP VENTILATOR LOUVER LH

7. REMOVE FRONT WIPER MOTOR AND LINK

8. REMOVE OUTER COWL TOP PANEL





(a) Separate the wire harness.






(b) Remove the 10 bolts and remove the cowl top panel outer.
9. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

10. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY





(a) Remove the bolt and remove the vacuum hose clamp.






(b) Disconnect the oil control valve connector.
(c) Remove the bolt and oil control valve.