Scan Tool Testing and Procedures
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: DATA LIST / ACTIVE TEST
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT: Using an intelligent tester or Techstream to read the DATA LIST allows the values and states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect an intelligent tester or Techstream to the DLC3.
(b) Turn the ignition switch ON and turn the tester ON.
(c) Enter the following menus.
(1) Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / MAIN BODY / DATA LIST / ALL
(2) Techstream - Select: Body Electrical / Main Body / Data List
(d) According to the display on tester, read the "DATA LIST" or "Data List".
(1) Intelligent tester
MAIN BODY:
(2) Techstream
Main Body:
2. PERFORM ACTIVE TEST
HINT: Using an intelligent tester or Techstream to perform ACTIVE TESTs allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing ACTIVE TESTs early in troubleshooting is one way to save diagnostic time. DATA LIST information can be displayed while performing ACTIVE TESTs.
(a) Connect an intelligent tester or Techstream to the DLC3.
(b) Turn the ignition switch ON and turn the tester ON.
(c) Enter the following menus.
(1) Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / MAIN BODY / ACTIVE TEST
(2) Techstream - Select: Body Electrical / Main Body / Active Test
(d) According to the display on tester, perform the "ACTIVE TEST" or "Active Test".
(e) Intelligent tester
MAIN BODY:
(f) Techstream
Main Body:
