Installation

EXTERIOR: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER COVER

(a) Connect the connector.

(b) Engage the 12 claws and install the rear bumper cover.





(c) Install the 6 clips.





(d) Tighten the 2 bolts and 2 screws.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

2. INSTALL REAR BUMPER PLATE LH

(a) Engage the 2 claws and install the rear bumper plate.





3. INSTALL REAR BUMPER PLATE RH

HINT
Use the same procedure as for the LH side.