Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER UPPER RETAINER LH

(a) Attach the 2 claws to install the rear bumper upper retainer.

(b) Install the screw.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

2. INSTALL REAR BUMPER UPPER RETAINER RH

HINT
Use the same procedure described for the LH side.

3. INSTALL REAR BUMPER SIDE RETAINER LH

(a) Attach the 3 claws to install the rear bumper side retainer.

(b) Install the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

4. INSTALL REAR BUMPER SIDE RETAINER RH

HINT
Use the same procedure described for the LH side.

5. INSTALL REAR BUMPER SIDE SEAL LH

(a) Install the rear bumper side seal with a new grommet and clip.

6. INSTALL REAR BUMPER SIDE SEAL RH

HINT
Use the same procedure described for the LH side.

7. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH

(a) Install the rear bumper arm with the 3 bolts.

Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)

8. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

9. INSTALL REAR BUMPER NO. 1 REINFORCEMENT

(a) Install the rear bumper No. 1 reinforcement with the 4 nuts.

Torque : 31 Nm (316 kgf-cm, 23 ft-lbf)

10. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Install the rear bumper energy absorber.

11. INSTALL REAR BUMPER COVER

(a) Attach the 12 claws to install the rear bumper cover.

(b) Install the 2 screws and 4 clips.

12. INSTALL REAR BUMPER UPPER STOPPER

HINT
Use the same procedure for both rear bumper upper stoppers.

(a) Install the rear bumper upper stopper.