Disassembly
DOOR / HATCH: BACK DOOR: DISASSEMBLY
1. REMOVE BACK DOOR PANEL CUSHION
(a) Using a clip remover, detach the clip and remove the back door panel cushion.
2. REMOVE BACK DOOR CENTER GARNISH
(a) Using moulding remover D, detach the 6 claws and remove the back door center garnish.
3. REMOVE REAR WASHER NOZZLE (w/ Rear Wiper) Removal
4. REMOVE BACK DOOR SIDE GARNISH LH
(a) Using moulding remover D, detach the 5 claws and remove the garnish.
5. REMOVE BACK DOOR SIDE GARNISH RH
(a) Using moulding remover D, detach the 5 claws and remove the garnish.
6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
(a) Using a clip remover, remove the 2 clips indicated by the 2 white arrows in the illustration.
(b) Detach the 12 clips and remove the trim.
7. REMOVE BACK DOOR NO. 1 SERVICE HOLE COVER
(a) Detach the 8 claws and remove the No. 1 service hole cover.
8. REMOVE BACK DOOR NO. 2 SERVICE HOLE COVER
(a) Detach the 4 claws and remove the No. 2 service hole cover.
9. REMOVE BACK DOOR LOCK ASSEMBLY Removal
10. REMOVE BACK DOOR OUTSIDE GARNISH
11. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY Removal
12. REMOVE CENTER STOP LIGHT ASSEMBLY Removal
13. REMOVE LICENSE PLATE LIGHT ASSEMBLY Removal
14. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper) Removal
15. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY (w/ Rear Wiper) Removal
16. REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper) Removal
17. REMOVE BACK DOOR LOWER STOPPER LH
(a) Remove the bolt and stopper.
18. REMOVE BACK DOOR LOWER STOPPER
HINT
Use the same procedures described for the LH side.
19. REMOVE BACK DOOR LOWER STOPPER CUSHION
(a) Remove the 2 bolts and stopper cushion.
20. REMOVE BACK DOOR STAY ASSEMBLY LH Removal
21. REMOVE BACK DOOR STAY ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
22. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET LH Removal
23. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET RH
HINT
Use the same procedures described for the LH side.
24. REMOVE BACK DOOR STAY BOLT Removal