Reassembly

MIRROR (EXT): OUTER REAR VIEW MIRROR: REASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH Installation

2. INSTALL OUTER MIRROR COVER LH

(a) Attach the 7 claws to install the outer mirror cover to the outer rear view mirror assembly with cover.

NOTICE:
If there is a gap between the cover and mirror body, it may cause noise during driving.

(b) Push on the cover at the locations of the 7 claws to confirm that the claws are attached properly.





3. INSTALL OUTER MIRROR LH Installation