Reassembly
SEAT: REAR SEAT ASSEMBLY: REASSEMBLY
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL REAR NO. 3 SEAT RECLINING CONTROL CABLE
(a) Install the 2 control cables as shown in the illustration.
NOTICE:
Install the cables so that the pieces of tape are in the locations shown in the illustration.
Text in Illustration
2. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH
(a) Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.
(b) Attach the hook.
Text in Illustration
3. INSTALL REAR SEATBACK COVER WITH PAD RH
(a) Attach the 2 guides to install the seatback cover with pad to the seatback frame.
(b) Attach the 4 claws to install the 2 headrest supports.
(c) Move the seatback board in the direction of the arrow to attach the 2 guides and install the seatback board.
(d) Attach the 2 claws.
(e) Close the 2 fasteners to close the seatback cover.
(f) Using hog ring pliers, install 5 new hog rings.
Text in Illustration
4. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH
(a) Connect the 2 cables to the control lever as shown in the illustration.
(b) Install the control lever with the 2 screws.
5. INSTALL REAR SEATBACK LOCK STRIKER COVER RH
(a) Attach the guide and claw to install the lock striker cover.
6. INSTALL REAR NO. 1 SEAT RECLINING COVER RH
(a) Move the reclining cover in the direction indicated by the arrow in the illustration to attach the guide and install the cover.
(b) Install the clip.
7. INSTALL REAR NO. 2 SEAT RECLINING COVER RH
(a) Move the reclining cover in the direction indicated by the arrow in the illustration to attach the guide and install the cover.
(b) Install the clip.
8. INSTALL REAR SEAT HEADREST ASSEMBLY RH
9. INSTALL REAR NO. 2 SEAT RECLINING CONTROL CABLE
(a) Install the 2 control cables as shown in the illustration.
NOTICE:
Install the cables so that the pieces of tape are in the locations shown in the illustration.
Text in Illustration
10. INSTALL REAR SEAT SHOULDER BELT COVER
(a) Attach the guide and 2 claws to install the shoulder belt cover.
11. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY Installation
12. INSTALL REAR SEAT SIDE HINGE MALE COVER RH
(a) Attach the guide to install the male cover.
13. INSTALL REAR SEAT SIDE HINGE MALE COVER RH
(a) Move the cover in the direction of the arrow to attach the guide and install the male cover.
14. INSTALL REAR SEAT SIDE HINGE MALE COVER LH
(a) Attach the 2 claws to install the male cover.
(b) Install the 2 screws.
15. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH
(a) Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.
(b) Attach the hook.
Text in Illustration
16. INSTALL REAR SEATBACK COVER WITH PAD LH
(a) Attach the 2 guides to install the seatback cover with pad to the seatback frame.
(b) Connect the outer belt to the seatback cover with pad.
(c) Attach the 8 claws to install the 4 headrest supports.
(d) Move the seatback board in the direction of the arrow to attach the 3 guides and install the seatback board.
(e) Attach the 3 claws.
(f) Close the 2 fasteners to close the seatback cover.
(g) Using hog ring pliers, install 7 new hog rings.
Text in Illustration
17. INSTALL SEAT BELT ANCHOR COVER CAP
(a) Connect the outer belt to the hole cover.
(b) Attach the 2 claws to install the anchor cover cap to the shoulder belt hole cover.
18. INSTALL REAR SEAT SHOULDER BELT HOLE COVER
(a) Attach the 2 guides and 2 claws to install the hole cover.
19. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
(a) Connect the 2 cables to the control lever as shown in the illustration.
(b) Install the control lever with the 2 screws.
20. INSTALL REAR SEATBACK LOCK STRIKER COVER LH
(a) Attach the guide and claw to install the lock striker cover.
21. INSTALL REAR NO. 2 SEAT RECLINING COVER LH
(a) Move the reclining cover in the direction indicated by the arrow in the illustration to attach the guide and install the cover.
(b) Install the clip.
22. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
23. INSTALL REAR SEAT HEADREST ASSEMBLY LH
24. INSTALL BENCH TYPE REAR SEAT CUSHION COVER
(a) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.
Text in Illustration
