Pinout Values and Diagnostic Parameters

CRUISE CONTROL: CRUISE CONTROL SYSTEM: TERMINALS OF ECM

1. CHECK ECM





(a) Disconnect the A35 and B30 ECM connectors.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the A35 and B30 ECM connectors.

(d) Measure the voltage according to the value(s) in the table below.





* *1: for Manual Transaxle

* *2: for Automatic Transaxle

* *3: w/ Shift Paddle Switch

If the result is not as specified, the ECM may be malfunctioning.