Engine Lubrication: Testing and Inspection

2AR-FE LUBRICATION: LUBRICATION SYSTEM: ON-VEHICLE INSPECTION

1. INSPECT ENGINE OIL LEVEL

(a) Warm up the engine, stop the engine and wait 5 minutes.

(b) Check that the oil level is between the dipstick low level mark and full level mark.

If the level is low, check for leakage and add oil up to the full level mark.

NOTICE:
Do not add engine oil above the full level mark.

2. INSPECT ENGINE OIL QUALITY

(a) Check the oil for deterioration, water contamination, discoloration or thinning. If the quality is visibly poor, replace the oil and filter.

3. INSPECT OIL PRESSURE

(a) Remove the oil pressure switch assembly Removal.

(b) Install an oil pressure gauge.





Text in Illustration





(c) Warm up the engine.

(d) Measure the oil pressure.

Standard Oil Pressure:





(e) Remove the oil pressure gauge.

(f) Install the oil pressure switch assembly Installation.