Removal

HEATING / AIR CONDITIONING: COMPRESSOR: REMOVAL

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FAN AND GENERATOR V BELT Removal

4. REMOVE GENERATOR ASSEMBLY Removal

5. REMOVE CENTER ENGINE UNDER COVER Removal

6. REMOVE NO. 1 ENGINE UNDER COVER Removal

7. REMOVE REAR ENGINE UNDER COVER RH Removal

8. REMOVE NO. 1 COOLER REFRIGERANT DISCHARGE HOSE





(a) Disconnect the 2 connectors and detach the 3 clamps.

(b) Remove the bolt and No. 1 cooler refrigerant discharge hose from the cooler compressor.





(c) Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

9. REMOVE SUCTION HOSE SUB-ASSEMBLY

(a) Remove the bolt and suction hose sub-assembly from the cooler compressor.





(b) Remove the O-ring from the suction hose sub-assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

10. REMOVE COOLER COMPRESSOR ASSEMBLY





(a) Remove the 2 bolts and 2 nuts.

(b) Using an E8 "TORX" socket, remove the 2 stud bolts and cooler compressor.