Removal

HEATING / AIR CONDITIONING: CONDENSER: REMOVAL

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

2. REMOVE FRONT BUMPER COVER

Removal

3. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler condenser.

(b) Remove the O-ring from the cooler refrigerant discharge hose.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

4. DISCONNECT AIR CONDITIONING TUBE ASSEMBLY

(a) Remove the bolt and disconnect the air conditioning tube assembly from the cooler condenser.

(b) Remove the O-ring from the air conditioning tube assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

5. REMOVE HIGH PITCHED HORN ASSEMBLY Removal

6. REMOVE LOW PITCHED HORN ASSEMBLY Removal

7. REMOVE HOOD LOCK ASSEMBLY Removal

8. REMOVE BATTERY CLAMP SUB-ASSEMBLY Removal

9. REMOVE UPPER RADIATOR SUPPORT Removal

10. REMOVE COOLER CONDENSER ASSEMBLY

(a) Remove the 2 bolts and No. 2 fan shroud.

(b) Remove the cooler condenser assembly.

11. REMOVE COOLER DRYER

(a) Using a 14 mm socket hexagon wrench, remove the cap from the modulator.

(b) Remove the O-ring from the cap.