Installation

PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY

(a) Connect the connector to the parking brake switch.

(b) Install the parking brake switch to the parking brake lever with the screw.

Torque : 0.9 Nm (9 kgf-cm, 8 in-lbf)

2. INSPECT BRAKE WARNING LIGHT

(a) Operate the parking brake lever and check the illumination condition of the brake warning light.

OK:

The brake warning light always illuminates at the first click.

3. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

Installation