Programming and Relearning

SEAT BELT: SEAT BELT WARNING SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE SEAT BELT WARNING SYSTEM

HINT
The following items can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Record the current settings before customizing.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Utility / Customize / Warning.

(5) Select the setting by referring to the table below.





* *: The buzzer which sounds at an interval of 1.2 seconds 5 times when the ignition switch is turned ON while the driver side seat belt is not fastened cannot be disabled.