Ball Joint
FRONT LOWER BALL JOINT ASSEMBLY LHUsing a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.
Standard turning torque 0.98 to 3.43 N*m (10 to 35 kgf*cm, 8.7 to 30 in.*lbf)
REAR NO. 1 SUSPENSION ARM ASSEMBLY LH
Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and take the torque reading on the fifth turn.
Standard turning torque 0.5 to 3.4 N*m (5.1 to 36 kgf*cm, 4.4 to 30 in.*lbf)