Front Axle Hub

AXLE AND DIFFERENTIAL: FRONT AXLE HUB: ON-VEHICLE INSPECTION

1. REMOVE FRONT WHEEL

2. DISCONNECT FRONT FLEXIBLE HOSE Removal

3. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY Removal

4. REMOVE FRONT DISC Removal

5. INSPECT FRONT AXLE HUB BEARING LOOSENESS





(a) Using a dial indicator, check for looseness near the center of the front axle hub sub-assembly.

Maximum:

0.05 mm (0.00197 in.)

NOTICE:
Make sure that the dial indicator is set perpendicular to the measurement surface.

HINT
If the looseness is more than the maximum, replace the front axle hub sub-assembly.

6. INSPECT FRONT AXLE HUB RUNOUT





(a) Using a dial indicator, check for runout on the surface of the front axle hub sub-assembly outside the front hub bolt.

Maximum:

0.05 mm (0.00197 in.)

NOTICE:
Make sure that the dial indicator is set perpendicular to the measurement surface.

HINT
If the runout is more than the maximum, replace the front axle hub sub-assembly.

7. INSTALL FRONT DISC Installation

8. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY Installation

9. CONNECT FRONT FLEXIBLE HOSE Installation

10. INSTALL FRONT WHEEL