Removal

AXLE AND DIFFERENTIAL: REAR AXLE HUB: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

Removal

3. LOOSEN PARKING BRAKE CABLE Removal

4. REMOVE PARKING BRAKE LEVER PROTECTOR

5. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY Removal

6. DISCONNECT REAR DISC BRAKE CALIPER ASSEMBLY LH

(a) Remove the 2 bolts, and disconnect the rear disc brake caliper assembly.

NOTICE:
Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.





7. REMOVE REAR DISC Removal

8. DISCONNECT SKID CONTROL SENSOR WIRE LH





(a) Disconnect the connector.

9. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH

(a) Remove the 4 bolts and the rear axle hub and bearing assembly.