Replacement

WIPER / WASHER: FRONT WIPER RUBBER: REPLACEMENT

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE FRONT WIPER BLADE LH

(a) Open the wiper blade holder.





(b) Remove the wiper blade as shown in the illustration.

2. REMOVE WIPER RUBBER LH

(a) Detach the head part (large side) of the wiper rubber from the wiper blade.

(b) Remove the wiper rubber in the direction indicated by the arrow in the illustration.





(c) Remove the 2 wiper rubber backing plates from the wiper rubber.





3. INSTALL WIPER RUBBER LH

(a) Install the 2 backing plates to the rubber.





NOTICE:
Make sure that the backing plates are facing the proper direction.

(b) Slide the wiper rubber into the wiper blade in the direction indicated by the arrow in the illustration to install it.





HINT
Make sure that the claws of the wiper blade fit securely into the grooves of the wiper rubber, and that the head part (large side) of the wiper rubber faces the end of the wiper arm that connects to the wiper motor.

4. INSTALL FRONT WIPER BLADE LH

(a) Install the wiper blade as shown in the illustration.