Removal

WIPER / WASHER: REAR WIPER MOTOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE BACK DOOR CENTER GARNISH Disassembly

3. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

4. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY Disassembly

6. REMOVE REAR WIPER ARM

(a) Open the wiper arm head cap.





(b) Remove the nut and rear wiper arm.





7. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 3 bolts and rear wiper motor and bracket assembly.

8. REMOVE REAR WIPER MOTOR GROMMET

(a) Remove the wiper motor grommet.