Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER COVER

(a) Engage the 8 claws and install the front bumper cover.

(b) Tighten the 8 screws.

(c) Install the pin hold clip.





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the remaining part.

(d) Install the screw.

HINT
Use the same procedure for the remaining part.

(e) Tighten the 4 bolts and install the 5 clips.

2. INSTALL NO. 1 RADIATOR GRILLE GARNISH

(a) Install the No. 1 radiator grille garnish with the 5 clips.