Disassembly

ENGINE HOOD / DOOR: BACK DOOR: DISASSEMBLY

1. REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY Removal

2. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY Removal

3. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

(a) Disengage the 13 clips and remove the back door trim board.





4. REMOVE DOOR PULL HANDLE

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the door pull handle.





5. REMOVE NO. 2 BACK DOOR PANEL PROTECTOR

(a) Remove the clip and remove the No. 2 back door panel protector.





6. REMOVE NO. 1 BACK DOOR PANEL PROTECTOR

HINT
Use the same procedure as for the No. 2 side.

7. REMOVE BACK WINDOW GLASS CHANNEL LH

(a) Remove the clip and remove the back window glass channel.





8. REMOVE BACK WINDOW GLASS CHANNEL RH

HINT
Use the same procedure as for the LH side.

9. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY Removal

10. REMOVE REAR WIPER MOTOR Removal

11. REMOVE REAR WIPER MOTOR GROMMET Removal

12. REMOVE BACK DOOR OUTSIDE GARNISH

13. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY Removal

14. REMOVE LICENSE PLATE LIGHT ASSEMBLY Removal

15. REMOVE BACK DOOR LOCK ASSEMBLY Removal