Reassembly

2AZ-FE LUBRICATION: OIL PUMP: REASSEMBLY

1. INSTALL OIL PUMP ROTOR

(a) Coat the drive rotor and driven rotor with engine oil.





(b) Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.

2. INSTALL OIL PUMP COVER





(a) Install the oil pump cover with the 5 bolts.

Torque : 8.8 Nm (90 kgf-cm, 78 in-lbf)

3. INSTALL OIL PUMP RELIEF VALVE





(a) Coat the relief valve with engine oil.

(b) Insert the relief valve and spring into the pump body hole.

(c) Using a deep socket wrench 27 mm, install the plug.

Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)

4. INSTALL OIL PUMP STRAINER





(a) Install a new gasket and the oil strainer with the 2 nuts.

Torque : 8.8 Nm (90 kgf-cm, 78 in-lbf)