Removal

2AZ-FE LUBRICATION: OIL PUMP: REMOVAL

HINT
Check whether the engine is TMC made or not by referring to the following illustration.





Text in Illustration





1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE HOOD Removal

3. REMOVE FRONT WHEEL RH

4. REMOVE NO. 1 ENGINE UNDER COVER

5. REMOVE REAR ENGINE UNDER COVER RH

6. DRAIN ENGINE OIL Replacement

7. SEPARATE CENTER EXHAUST PIPE ASSEMBLY Removal

8. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

9. REMOVE FAN AND GENERATOR V BELT Removal

10. REMOVE RADIATOR RESERVE TANK ASSEMBLY Removal

11. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

12. REMOVE IGNITION COIL ASSEMBLY Removal

13. REMOVE SPARK PLUG Removal

14. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY Removal

15. REMOVE GENERATOR ASSEMBLY Removal

16. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH Removal

17. REMOVE FRONT ENGINE MOUNTING INSULATOR SUB-ASSEMBLY Removal

18. REMOVE IDLER PULLEY SUB-ASSEMBLY Removal

19. REMOVE OIL PAN SUB-ASSEMBLY Removal

20. SET NO. 1 CYLINDER TO TDC / COMPRESSION Removal

21. REMOVE CRANKSHAFT PULLEY Removal

22. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY Removal

23. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING BRACKET Removal

24. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY Removal

25. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY Removal

26. REMOVE CRANKSHAFT POSITION SENSOR (for TMC Made Engine) Disassembly

27. REMOVE CRANKSHAFT POSITION SENSOR (except TMC Made Engine) Removal

28. REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY Removal

29. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE Removal

30. REMOVE TIMING CHAIN GUIDE Removal

31. REMOVE CHAIN TENSIONER SLIPPER Removal

32. REMOVE NO. 1 CHAIN VIBRATION DAMPER Removal

33. REMOVE CHAIN SUB-ASSEMBLY

34. REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET Removal

35. REMOVE NO. 2 CHAIN SUB-ASSEMBLY Removal

36. REMOVE OIL PUMP ASSEMBLY





(a) Remove the 3 bolts, oil pump and gasket.