Refrigerant: Testing and Inspection

AIR CONDITIONING: REFRIGERANT: ON-VEHICLE INSPECTION

1. CHECK REFRIGERANT PRESSURE USING MANIFOLD GAUGE SET

(a) This is a method to identify trouble areas by using a manifold gauge set. Read the manifold gauge pressure under the following conditions.

Test conditions:

* Engine warm.

* All doors fully open.

* A/C switch ON.

* Blower speed control switch at HI.

* Engine running at 1,500 rpm.

* Air inlet mode damper set at recirculation.

* Temperature control lever in MAX. COLD position.

* Air temperature at air inlet 30 to 35°C (86 to 95°F).

(1) When the refrigerant volume is correct, the gauge reading indicates as follows:





Gauge reading:





HINT
Pressure varies in accordance with certain conditions (outside air temperature, sunlight and wind).

(2) When there is moisture in the refrigeration system:









(3) When cooling is insufficient:









(4) When the circulation of the refrigerant is poor:









(5) When the refrigerant does not circulate:









(6) When the refrigerant is overcharged or cooling of condenser is insufficient:









(7) When there is air in the refrigeration system:









(8) When the expansion valve malfunctions:









When the compressor is defective:









2. INSPECT IDLING SPEED

(a) Warm up the engine.

(b) Inspect the idling speed when these conditions are established.

* Engine warm

* When checking the idling speed, shift the transmission to either the neutral position or the parking position.

Standard:

for manual transaxle
for automatic transaxle










If the idling speed is not as specified, check the idle control system.