Reading and Clearing Diagnostic Trouble Codes

METER: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

(e) Check for DTCs and then write them down.

HINT
Refer to the Techstream operator's manual for further details.

(f) Confirm the details of the DTCs Meter / Gauge System.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

HINT
Refer to the Techstream operator's manual for further details.

(e) Clear DTCs.

HINT
Refer to the Techstream operator's manual for further details.