Removal

METER: LIGHT CONTROL RHEOSTAT: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal

3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

4. REMOVE FRONT PILLAR GARNISH RH Removal (to 10/2010)

5. REMOVE FRONT PILLAR GARNISH LH Removal (to 10/2010)

6. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY Removal

7. REMOVE INSTRUMENT CLUSTER FINISH LOWER PANEL Removal

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

9. REMOVE COMBINATION METER ASSEMBLY Removal

10. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

11. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

12. REMOVE NO. 1 SWITCH HOLE BASE Removal

13. REMOVE LIGHT CONTROL RHEOSTAT





(a) Disengage the 2 claws and remove the light control rheostat.