Removal

2AZ-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE REAR ENGINE UNDER COVER RH

2. REMOVE FAN AND GENERATOR V BELT





(a) Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then remove the fan and generator V belt.

SST : 09216-42010

09216-04010

NOTICE:
* Be sure to connect SST and the tools so that they are in line during use.
* When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
* After the tensioner is fully retracted, do not apply force any more than necessary.