Installation (to 10/2010)

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Connect the tire pressure warning ECU connector.

(b) Install the tire pressure warning ECU with the bolt.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation (to 10/2010)

3. INSTALL REAR SEAT BACK HINGE SUB-ASSEMBLY

(a) Install the rear seat back hinge with the washer and bolt.





Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

(a) Install the 2 luggage hold belt strikers with the 2 bolts.





5. INSTALL REAR DECK TRIM COVER Installation (to 10/2010)

6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

(a) Align the paint mark on the weatherstrip LH and the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.





7. INSTALL REAR DOOR SCUFF PLATE LH

(a) Engage the 8 claws and install the rear door scuff plate LH.





8. INSTALL REAR SEATBACK ASSEMBLY LH Installation

9. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

10. INSTALL DECK FLOOR BOX RH Installation (to 10/2010)

11. INSTALL DECK FLOOR BOX LH Installation (to 10/2010)

12. INSTALL REAR DECK FLOOR BOX Installation (to 10/2010)

13. INSTALL REAR FLOOR CARPET ASSEMBLY Installation (to 10/2010)

14. REGISTER TRANSMITTER ID

HINT
Registration

15. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure

16. INITIALIZE SYSTEM

NOTICE:
* Be sure to register the transmitter ID of all tires in the ECU before initialization.
* Be sure to inflate all tires to the proper inflation pressure before initialization.

HINT
Initialization