Disassembly

U241E AUTOMATIC TRANSAXLE: OIL PUMP: DISASSEMBLY

1. INSPECT OIL PUMP ASSEMBLY

(a) Turn the drive gear with 2 screwdrivers and make sure it rotates smoothly.





NOTICE:
Be careful not to damage the oil seal lip.

2. REMOVE CLUTCH DRUM OIL SEAL RING

(a) Remove the 2 clutch drum oil seal rings.





3. REMOVE STATOR SHAFT ASSEMBLY

(a) Using a T30 ''Torx'' socket, remove the 11 bolts and stator shaft.





4. REMOVE FRONT OIL PUMP DRIVE GEAR

(a) Remove the front oil pump drive gear.





5. REMOVE FRONT OIL PUMP DRIVEN GEAR

(a) Remove the front oil pump driven gear.





6. REMOVE FRONT OIL PUMP BODY O-RING

(a) Using a screwdriver, pry out the O-ring.





HINT
Tape the screwdriver before use.

7. REMOVE FRONT OIL PUMP OIL SEAL

(a) Mount the oil pump in a soft jaw vise.





(b) Using SST, tap the oil seal out from the oil pump body.

SST : 09308-00010