Removal

WIPER AND WASHER: REAR WIPER RUBBER: REMOVAL

1. REMOVE REAR WIPER BLADE ASSEMBLY

(a) Open the rear wiper arm head cap.





(b) Raise the wiper blade to the position where the claw detaches with a ''click'' sound, as shown in the illustration.





NOTICE:
Be careful not to damage the claw.

(c) Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.





NOTICE:
Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

2. REMOVE REAR WIPER RUBBER

(a) Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration.





NOTICE:
Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

HINT
Lightly pushing the rubber between the ends and middle will allow it to be removed more easily.