Reassembly

ENGINE HOOD / DOOR: BACK DOOR: REASSEMBLY

1. INSTALL REAR SPOILER SUB-ASSEMBLY Installation

2. INSTALL BACK DOOR LOCK ASSEMBLY Installation

3. INSTALL LICENSE PLATE LIGHT ASSEMBLY Installation

4. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY Installation

5. INSTALL BACK DOOR OUTSIDE GARNISH

6. INSTALL REAR WIPER MOTOR GROMMET Installation

7. INSTALL REAR WIPER MOTOR Installation

8. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY Installation

9. INSTALL BACK DOOR FINISH PANEL COVER LH

(a) Install the back door finish panel cover with the 2 clips.





10. INSTALL BACK DOOR FINISH PANEL COVER RH

HINT
Use the same procedure as for the LH side.

11. INSTALL BACK DOOR TRIM BOARD ASSEMBLY





(a) Engage the 12 clips and install the back door trim board assembly.

12. INSTALL BACK DOOR INSIDE HANDLE

(a) Engage the 4 claws and install the door pull handle.





13. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY Installation

14. INSTALL BACK DOOR SIDE GARNISH LH





(a) Engage the 3 clips and 2 claws and install the back door side garnish LH.

(b) Engage the pin.

15. INSTALL BACK DOOR SIDE GARNISH RH

HINT
Use the same procedure as for the LH side.

16. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY





(a) Engage the 2 claws and 4 clips and install back door trim upper panel assembly.