Reassembly

2ZR-FE LUBRICATION: OIL PUMP: REASSEMBLY

1. INSTALL OIL PUMP COVER SUB-ASSEMBLY

(a) Coat the drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side, as shown in the illustration.





(b) Install the oil pump cover sub-assembly with the 5 bolts.





Torque : 8.8 Nm (90 kgf-cm, 79 in-lbf)

2. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the relief valve with engine oil.





(b) Insert the oil pump relief valve and valve spring into the oil pump body hole.

(c) Using a 27 mm socket wrench, install the oil pump relief valve plug.

Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)