Installation

AIR CONDITIONING: CONDENSER: INSTALLATION

1. INSTALL COOLER CONDENSER ASSEMBLY





(a) Engage the 2 claws and install the cooler condenser into the vehicle.

NOTICE:
Do not damage the condenser or radiator when installing the condenser.

HINT
If a new cooler condenser is installed, add compressor oil to the condenser as follows.

Capacity:

Add 40 cc (1.35 fl. oz.)

Compressor oil:

ND-OIL8 or equivalent.

2. CONNECT LIQUID TUBE SUB-ASSEMBLY A





(a) Remove the attached vinyl tape from the pipe and the connecting part of the cooler condenser.

(b) Apply sufficient compressor oil to a new O-ring and the fitting surface of the tube joint.

Compressor oil:

ND-OIL8 or equivalent

(c) Install the O-ring onto the air conditioning tube.

(d) Install the air conditioning tube onto the cooler condenser with the bolt.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

3. CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE





(a) Remove the attached vinyl tape from the hose and the connecting part of the cooler condenser.

(b) Apply sufficient compressor oil to a new O-ring and the fitting surface of the hose joint.

Compressor oil:

ND-OIL8 or equivalent

(c) Install the O-ring onto the discharge hose.

(d) Install the discharge hose onto the cooler condenser with the bolt.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

4. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY Installation

5. INSTALL NO. 1 COOLER COVER Installation

6. INSTALL HOOD LOCK ASSEMBLY Installation

7. INSTALL UPPER RADIATOR SUPPORT ABSORBER Reassembly

8. INSTALL FRONT BUMPER COVER Installation

9. INSPECT HOOD Adjustments

10. ADJUST HOOD Adjustments

11. CHARGE REFRIGERANT Service and Repair

12. WARM UP ENGINE Service and Repair

13. INSPECT FOR REFRIGERANT LEAK Service and Repair