Installation

LIGHTING: FRONT DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL FRONT DOOR COURTESY SWITCH





(a) Connect the connector.

(b) Using "TORX" socket wrench T30, install the front door courtesy switch with the screw.

Torque : 3.7 Nm (38 kgf-cm, 33 in-lbf)

2. INSTALL CENTER PILLAR LOWER GARNISH

HINT
Use the same procedure as for the RH side Installation.

3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

(a) Install the rear door opening trim weatherstrip.





4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

(a) Install the front door opening trim weatherstrip.





5. INSTALL REAR DOOR SCUFF PLATE

HINT
Use the same procedure as for the RH side Installation.

6. INSTALL FRONT DOOR SCUFF PLATE

HINT
Use the same procedure as for the RH side Installation.