Fluid - M/T: Testing and Inspection

C50 MANUAL TRANSAXLE: MANUAL TRANSAXLE OIL: ON-VEHICLE INSPECTION

1. INSPECT TRANSAXLE OIL





(a) Stop the vehicle in a level place.

(b) Remove the filler plug and the gasket.

(c) Check that the oil surface is within 5 mm (0.20 in.) of the bottom of the filler plug opening.

NOTICE:
* Excessively large or small amounts of oil may cause problems.
* After replacing the oil, drive the vehicle and check the oil level again.

(d) Check for oil leakage when the oil level is low.

(e) Install the filler plug and a new gasket.

Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)