Removal

AXLE: REAR AXLE HUB: REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY Removal

3. DISCONNECT SPEED SENSOR WIRE





(a) Using a screwdriver, remove the claw of the connector lock portion and disconnect the skid control sensor wire connector.

NOTICE:
Do not remove the connector cover from the connector because the skid control sensor wire may be damaged.

4. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY





(a) Remove the 4 bolts and remove the axle hub and bearing from the axle beam.

NOTICE:
Suspend the backing plate with a piece of rope.