Reassembly

2ZR-FE FUEL: FUEL PUMP: REASSEMBLY

1. INSTALL FUEL PUMP

(a) Connect the fuel pump harness.





(b) Apply gasoline to the collar and a new O-ring, and then install them into the fuel filter.





NOTICE:
* Do not remove the suction filter from the fuel pump, because they are nonreusable parts.

(c) Engage the 5 claws of the fuel pump.





NOTICE:
* Do not remove the suction filter.
* Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

(d) Engage the 2 claws of the fuel suction support.

(e) Engage the 4 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.





(f) Connect the fuel pump filter hose.





(g) Connect the connector of the fuel pump harness.





2. INSTALL FUEL SENDER GAUGE ASSEMBLY

(a) Install the fuel sender gauge by sliding it downward.





(b) Connect the connector of the fuel sender gauge.