Replacement

SUSPENSION: REAR AXLE BEAM: REPLACEMENT

1. REMOVE REAR AXLE CARRIER BUSH LH





(a) Place a matchmark on the axle beam with it aligned with the bush mark.

(b) Using a chisel and hammer, bend the 2 portions of the bush rib.

NOTICE:
Bend the bush rib until the claw of SST can be suspended.

(c) Using SST, remove the bush from the axle beam.

SST : 09950-40011

09951-04020

09952-04010

09953-04030

09954-04020

09955-04011

09957-04010

09958-04011

SST : 09612-30012

SST : 09950-60010

09951-00590

NOTICE:
Apply paint to any scratches on the rear axle beam.

2. REMOVE REAR AXLE CARRIER BUSH RH

HINT
The removal procedure for the RH side is the same as that for the LH side.

3. INSTALL REAR AXLE CARRIER BUSH LH





(a) Align the matchmarks on a new bush and the axle beam and provisionally install the bush onto the axle beam, as shown in the illustration.

NOTICE:
Install the new bush in the same orientation as the old one was prior to removal, because they are directional.

(b) Using SST, install the bush onto the axle beam.





SST : 09950-40011

09951-04020

09952-04010

09953-04030

09954-04030

09955-04051

09957-04010

09958-04011

SST : 09950-60020

09951-00810

09387-02010

SST : 09223-15020

NOTICE:
Do not damage the rubber portion when installing the bush.

4. INSTALL REAR AXLE CARRIER BUSH RH

HINT
The installation procedure for the RH side is the same as that for the LH side.