Installation

AXLE: REAR AXLE HUB: INSTALLATION

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY

(a) Install the axle hub and bearing onto the axle beam with the 4 bolts.





Torque : 90 Nm (918 kgf-cm, 67 ft-lbf)

2. INSPECT REAR AXLE HUB BEARING Rear Axle Hub

3. CONNECT SPEED SENSOR WIRE





(a) Connect the skid control sensor wire connector.

4. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

5. ADJUST REAR DRUM BRAKE SHOE CLEARANCE Installation

6. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

7. CHECK VSC SENSOR SIGNAL

HINT
Test Mode Procedure