Front Axle Hub

AXLE: FRONT AXLE HUB: ON-VEHICLE INSPECTION

1. REMOVE FRONT WHEEL

2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY Removal

3. REMOVE FRONT DISC

4. INSPECT FRONT AXLE HUB BEARING





(a) Inspect the axle hub backlash.

(1) Using a dial indicator, check the backlash near the center of the axle hub.

Maximum:

0.05 mm (0.0020 in.)

If the backlash exceeds the maximum, replace the bearing.

(b) Inspect the axle hub runout.





(1) Using a dial indicator, check the runout of the surface of the axle hub.

Maximum:

0.05 mm (0.0020 in.)

If the runout exceeds the maximum, replace the bearing and axle hub.

5. INSTALL FRONT DISC

6. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY Installation

7. INSTALL FRONT WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)