Stereo System - Noise Reduction Adapter
87subaru2NUMBER 15-45-87
DATE 08-17-87
APPLICABILITY
1987 STATION WAGON, SEDAN, 3 DOOR COUPE, XT
SUBJECT: ACCESSORY EQ DECK, SOA 333E130 NOISE REDUCTION
If your vehicle is equipped with an EQ Cassette Deck in combination with a Panasonic ETR Radio, adapter SOA 333E304 may be needed to assist with noise reduction (distortion and tape feedback) present only when operating the cassette in the forward or reverse mode. To verify, insert a cassette into the EQ Deck and push the fast forward or reverse mode, if excessive tape distortion or feedback can be heard the adaptor may be necessary.
The installation and labor time for this modification is shown below.
NOTE: THIS ADAPTER IS REQUIRED WHEN USED IN CONJUNCTION WITH PANASONIC ETR'S ONLY. PANASONIC RADIOS CAN BE IDENTIFIED BY THE "N" SYMBOL ON THE FACE OF THE RADIO.
1. REMOVE THE RADIO AND EQ DECK.
2. LOCATE THE 8-PIN DIN CONNECTOR ON THE BACK OF THE ETR AND CONNECT THE MALE PLUG FROM THE ADAPTER.
3. LOCATE THE 8-PIN DIN CORD COMING FROM THE EQ DECK AND CONNECT THE FEMALE END OF THE ADAPTER TO IT.
4. REINSTALL THE RADIO AND EQ DECK.
5. VERIFY THAT THE NOISE LEVEL IS REDUCED WHEN USING THE FORWARD OR REVERSE MODE.
Warranty Information
Repair may only be claimed under warranty if the vehicle is within the warranty period Failure Code ZHI-48
Labor Operation A103-111 0.3 hrs.
Part Number SOA 333E304