Hitachi

COMPRESSOR CLUTCH
Hub To Pulley Clearance 0.020 - 0.031 in (0.5 - 0.8 mm)

PULSER PICK-UP ASSEMBLY
Air Gap At Clutch 0.08 - 0.16 in (2 - 4 mm)

COMPRESSOR V-BELT
Deflection 0.295 - 0.335 in (7.5 - 8.5 mm) @ 22 lb (10 kg)

TORQUE VALUES
Compressor Hub Nut 14 - 15 ftlb (19 - 21 Nm)
Compressor Mounting Bolts 18 - 26 ftlb (25 - 35 Nm)
Receiver/Drier Pipes 7 - 14 ftlb (10 - 20 Nm)
Receiver/Drier Mount Bolt 4.0 - 6.9 ftlb (5.4 - 9.3 Nm)
Fitting-To-Compressor Bolts 13 - 23 ftlb (18 - 23 Nm)
Condenser Mount Bolts
Upper 7 - 13 ftlb (10 - 18 Nm)
Lower 4.1 - 7.0 ftlb (5.5 - 9.5 Nm)
Condenser Line Fittings
Left-Hand Piping Nut 11 - 18 ftlb (15 - 25 Nm)
Right-Hand Piping Nut 7 - 14 ftlb (10 - 20 Nm)
Evaporator
Low Pressure Pipe 14 - 22 ftlb (20 - 29 Nm)
Receiver Side Pipe 7 - 14 ftlb (10 - 20 Nm)
Expansion Valve
Mounting Nut 1.8 - 3.3 ftlb (2.5 - 4.4 Nm)
Discharge Pipe Union Nut 7 - 14 ftlb (10 - 20 Nm)
Nut On Discharge Side 7 - 14 ftlb (10 - 20 Nm)
Nut On Suction Side 14 - 22 ftlb (20 - 29 Nm)