Fuel Pump: Service and Repair
REMOVALFig. 21:
1. Remove 3 flange bolts and remove filter/pump bracket. See Fig. 21.
2. Disconnect fuel pump electrical connector.
Fig. 22:
3. Disconnect hoses from fittings A and B. Cap off hoses to prevent fuel spillage. See Fig. 22.
Fig. 23:
4. Disconnect hose at C. See Fig. 23.
5. Remove fuel pump fasteners and remove pump.
INSTALLATION
1. Insert pump into hose at C. See Fig. 23.
Fig. 26:
2. Attach fuel pump to bracket. See Fig. 26.
Fig. 25:
3. Turn ears of clip as shown. See Fig. 25.
Fig. 27:
4. Connect hoses at A and B. See Fig. 22 and Fig. 27.
Fig. 28:
5. Connect fuel pump electrical connector. Do not allow harness to sag under vehicle. See Fig. 28.
Fig. 29:
6. Fasten filter/pump bracket to body and torque fasteners. See Fig. 29.
TORQUE VALUE
5.3 - 5.6 ft.lbs (7.2 - 7.6 Nm)
Fig. 30:
Fig. 31:
7. Using Fig. 30 and Fig. 31, confirm hoses are connected and routed correctly.