Select Monitor Kit - Usage Information
88subaru08NUMBER 14-12-88
DATE 12-22-88
1989 MODEL YEAR VEHICLES
SUBJECT: USAGE OF THE SELECT MONITOR KIT P/N 498307000 ON 1989 VEHICLES
The Subaru SELECT MONITOR KIT, P/N 498307000 can be used on all 1989 model year Subaru vehicles by following the procedures below:
JUSTY
It is necessary to utilize a new cartridge when using the SELECT MONITOR on a 1989 Justy. This cartridge can be obtained through the Subaru Parts Department under P/N 498347400. This cartridge can also be used on 1988 model year Justy vehicles.
4 DR., SW AND 3 DR. SPI VEHICLES
Use cartridge A. The SELECT MONITOR will recognize the 1989 system although the display will indicate 1988 for the "PROM ID NUMBER". No additional cartridge is required.
4 DR., SW AND 3 DR. HPI VEHICLES
Using cartridge B, after connecting and turning on the SELECT MONITOR, press 7811 and ENT. This code will allow the monitor to identify the 1989 system, although the display will indicate 1988 for the "PROM ID NUMBER".
XT EA82 (1800 cc OHC)
Use cartridge B. After connecting and turning on the SELECT MONITOR, press 7814 and ENT. This code will allow the monitor to identify the 1989 system, although the display will indicate 1988 for the "PROM ID NUMBER".
XT6 ER27 (2700 cc)
Use cartridge B. The SELECT MONITOR will recognize the 1989 system although the display will indicate 1988 for the "PROM ID NUMBER".
NOTE: On vehicles requiring the 7811 or 7814 access code, if the wrong code is entered according to vehicle type, the monitor will display some data, however, the data list will be incomplete.