4EAT Valve Body Servicing

When splitting the 4EAT valve body for cleaning or servicing, it's tough to remember just where all of the bolts and brackets go. A good tip that's worth repeating is to use a paper or cardboard template that depicts the actual valve body and bolt locations. The bolts can then be placed in the proper location in the template which really speeds re-assembly. To make a template, make a photocopy of the valve body, transfer to a piece of cardboard, and poke the necessary holes. Use the 4EAT transmission module TRB to make your photocopy. If you have trouble locating yours, contact your Technical Training Representative who can hook you right up.