Restraint Systems
5-5-39-------------
CAUTION:
Before troubleshooting airbag system, disconnect battery ground cable, turn ignition switch "OFF" and then wait at least 10 minutes.
1. AIRBAG CONTROL UNIT DOUBLE LOCK INSPECTION [AT CONNECTORS (AB4) (AB5) (AB6)]
1) Check double lock of connectors (AB4) (AB5) (A86) connected to airbag control unit.
2. DOUBLE LOCK INSPECTION [FOR CONNECTORS (AB3) AND (AB8) AT HARNESS SPOOL
1) Remove lower cover and panel. ~Refer to 5-4 [W200] .>
2) Check double lock of connectors (AB3) and (AB8) at harness spool.
5-5-40----------
3. DOUBLE LOCK INSPECTION [FOR CONNECTORS (AB2) AND (AB7) AT ROLL CONNECTOR
1) Remove airbag module
5-5-41---------